Forum Replies Created
-
Posts
-
Re: Whirlpool help please
you can get a module for this machine from QER (do a google search quality electronic repairs) for approx £30 exchange, you just need the number from the board usually H8.1 and the coding number-i think it starts with 546*****
Re: Indesit DIF04 tripping RCD
the water pumps dont usually trip the rcd. check the heater and look on the pcb, if the pcb blows it is very obvious.
Re: Advice needed – Safety Issue!
if you add 20 to the 82 it is 2002 this is how the fd number works, i was told this by a bosch engineer so add 20 to the first 2 numbers and this is the year it was manufactured
Re: AWCT10L Dead
the pcb is probably the most common part to go on these machines, i fit loads of them to the awct10l
Re: Inde WDG1295 WG UK which timer – URGENT
the C00056022 has a red shaft and the other one has a white shaft
Re: HOTPOINT WD420 DOOR LOCK
i have had this before. i removed the plastic cover that is a heat shield for the drier, without this it will get very hot when drying so be warned. it should work ok once removed, officially you may have to change complete door
Re: Whirlpool ADP 129 AV integrated dishwasher – door issue
this dishwasher is 17 years old but the parts are quite easy to change, it is usually plastic spring retainers and the metal strips
Re: cannon C60GCIK no gas coming to the oven
look for broken wires to the fsd, they are prone to getting burnt
Re: Electrolux ER78311 stat problem?
they can be regassed but usually they have lost gas for a reason so if it is regassed and only lasts a short time then it is time to replace the fridge
Re: Elba PXDO60 main oven failure
elba are made by delonghi, more than likely the circular element has gone, tripping your fuse
Re: Hotpoint HVF344UK
if it is a sole motor then the car99 should fit or hotpoint number C00114885 equivalent
